FCT162823CTPACTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 5V, 300pF |
| Prop. Delay@Nom-Sup | 6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
FCT162823CTPACTG4 Overview
As a result, it is packaged as 56-TFSOP (0.240, 6.10mm Width). The package Tape & Reel (TR)contains it. It is configured with Tri-State, Non-Invertedas an output. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. JK flip flop belongs to the 74FCTseries of FPGAs. A total of 2elements are contained within it. Despite external influences, it consumes 500μAof quiescent current. There have been 56 terminations. Members of the 74FCT162823family make up this object. Power is supplied from a voltage of 5V volts. There is 4.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as FCT. In this case, the electronic component is mounted in the way of Surface Mount. With its 56pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. There are 9bits in this flip flop. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 4.5V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. There are 2 ports embedded in the flip flops. It offers maximum design flexibility with its output current of 24mA. There are 9 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
FCT162823CTPACTG4 Features
Tape & Reel (TR) package
74FCT series
56 pins
9 Bits
5V power supplies
FCT162823CTPACTG4 Applications
There are a lot of Texas Instruments FCT162823CTPACTG4 Flip Flops applications.
- Parallel data storage
- Differential Individual
- ESD protection
- CMOS Process
- Divide a clock signal by 2 or 4
- Patented noise
- Instrumentation
- Test & Measurement
- Supports Live Insertion
- Load Control
