FCT162841CTPVCTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162841 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20.5mA |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 5.5 ns |
| Number of Input Lines | 20 |
| Independent Circuits | 2 |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FCT162841CTPVCTG4 Overview
In the package 56-BSSOP (0.295, 7.50mm Width), it can be found. Tape & Reel (TR) is the packaging method. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. There is -40°C~85°C operating temperature. An FPGA in this series belongs to the 74FCT family. This electronic part is designed with 10 Bits. This device is designed with 56 terminations. This type belongs to the 74FCT162841 family. With a supply voltage of 5V, it operates. It has 56 pins that makes it easy to use. FCT is the family name of this electronic device. In addition, it is designed with a pin number of 56. Surface Mount is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. There are electronic circuits attached to the 20 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. Without external influences, it consumes 5μA quiescent current.
FCT162841CTPVCTG4 Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
10 Bits
74FCT162841 family
56 pin count
56 pins
5V power supplies
FCT162841CTPVCTG4 Applications
There are a lot of Texas Instruments FCT162841CTPVCTG4 Latches applications.
- Buffer Storage
- TV Set-top Boxes
- Motor Drives
- Parallel data storage
- Parallel data synchronization
- Multistage ripple counting
- Automotive Cluster
- Hammer
- Lamp and Display (LED)
- Frequency dividing
