Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 Thin, TSOT-23-6 |
Number of Pins |
6 |
Weight |
36mg |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
130mOhm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Peripheral Drivers |
Power Rating |
700mW |
Voltage - Rated DC |
8V |
Max Power Dissipation |
700mW |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Terminal Pitch |
0.95mm |
Current Rating |
1.8A |
Base Part Number |
FDC6325 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
1.8A |
Voltage |
8V |
Interface |
On/Off |
Current |
1.8A |
Output Configuration |
High Side |
Power Dissipation |
700mW |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
1.5V~8V |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Max Input Voltage |
8V |
Drain to Source Voltage (Vdss) |
8V |
Nominal Input Voltage |
8V |
Continuous Drain Current (ID) |
1.8A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~8V |
Driver Number of Bits |
1 |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
115m Ω |
Drain to Source Resistance |
130mOhm |
Height |
1mm |
Length |
3mm |
Width |
1.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FDC6325L Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the SOT-23-6 Thin, TSOT-23-6 package.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -55°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of 1.5V~8V is required for it to operate.A maximum output voltage of P-Channel volts has been specified.It belongs to the FDC6325 family.It contains 6 terminations.In order to operate, the 6 pins are used.This operation requires the maximum output current to be decreased to 1.8A.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 130mOhm.This case results in a 1A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver can handle voltages up to 8V volts.The input voltage minimum is 2.5V volts.
FDC6325L Features
Resistance of 130mOhm
FDC6325L Applications
There are a lot of ON Semiconductor FDC6325L Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Solid-State Drives
- Handheld Devices
- Low Voltage I/O System Power
- Set-Top Boxes
- Telecom and Network Systems
- Portable/Handheld Devices
- Hot-Swap Systems
- Wireless Modem Data Cards