FDG6323L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 300mW |
| Voltage - Rated DC | 2.5V |
| Max Power Dissipation | 300mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Current Rating | 600mA |
| Base Part Number | FDG6323 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 600mA |
| Polarity | NPN, PNP |
| Voltage | 8V |
| Interface | On/Off |
| Current | 600mA |
| Output Configuration | High Side |
| Power Dissipation | 300mW |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 1.5V~8V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 8V |
| Drain to Source Voltage (Vdss) | 8V |
| Nominal Input Voltage | 8V |
| Continuous Drain Current (ID) | 600mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~8V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.27A |
| Rds On (Typ) | 410m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FDG6323L Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 6-TSSOP, SC-88, SOT-363 package.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -55°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of 1.5V~8V.The maximum output voltage is P-Channel volts.A lighting driver with Slew Rate Controlled features is available.It is part of the FDG6323 family of LED drivers.It consists of 6 terminations in total.For operation, 6 pins are used.Maximum output current falls to 600mA when operation criteria are met.Surface Mount is mounted in the way of this lighting driver.There is 550mOhm resistance on the LED driver.When this is the case, the output current is set to 600mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.Its maximum input voltage is 8V volts.The minimum input voltage is 2.5V volts.
FDG6323L Features
Resistance of 550mOhm
FDG6323L Applications
There are a lot of ON Semiconductor FDG6323L Power Switches ICs applications.
- USB Protection
- Portable Music Players
- Mobile Communication Devices
- Storage Drives
- Notebook PC
- USB Power Distribution
- PC Cards
- USB Power Distribution
- Wearable Devices
- Notebook and Tablet Computers
