FDG6324L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ESD PROTECTED |
| Subcategory | Peripheral Drivers |
| Voltage - Rated DC | 20V |
| Max Power Dissipation | 300mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 600mA |
| Base Part Number | FDG6324 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 600mA |
| Voltage | 20V |
| Interface | On/Off |
| Current | 600mA |
| Output Configuration | High Side |
| Power Dissipation | 300mW |
| Output Current | 270mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 3V |
| Max Input Voltage | 20V |
| Drain to Source Voltage (Vdss) | 8V |
| Nominal Input Voltage | 20V |
| Continuous Drain Current (ID) | 600mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~20V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.27A |
| Rds On (Typ) | 370m Ω |
| Drain to Source Resistance | 300mOhm |
| Built-in Protections | TRANSIENT |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FDG6324L Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 6-TSSOP, SC-88, SOT-363 contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -55°C~150°C TJ.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.Voltage output is P-Channel volts at maximum.There are Slew Rate Controlled features available on the LED driving board.I believe it belongs to the FDG6324 family.A total of 6 terminations can be found in it.In order to operate, 6 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 600mA when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 550mOhm.This results in a 270mA output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It has a maximum input voltage of 20V volts.There is a minimum input voltage of 3V volts.This LED driver can also produce ESD PROTECTED.
FDG6324L Features
Resistance of 550mOhm
Additional features like ESD PROTECTED
FDG6324L Applications
There are a lot of ON Semiconductor FDG6324L Power Switches ICs applications.
- Portable Devices
- PC Cards
- PDAs
- Portable GPS
- USB Ports/Hubs
- Set-Top Boxes
- Portable Music Players
- Gaming
- USB Power Distribution
- Hot Swaps
