FDG6331L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 310mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 300mW |
| Voltage - Rated DC | 8V |
| Max Power Dissipation | 300mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 800mA |
| Base Part Number | FDG6331 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Operating Supply Voltage | 8V |
| Voltage | 8V |
| Interface | On/Off |
| Current | -800mA |
| Output Configuration | High Side |
| Power Dissipation | 300mW |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 8V |
| Drain to Source Voltage (Vdss) | 8V |
| Nominal Input Voltage | 8V |
| Continuous Drain Current (ID) | 800mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 155m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FDG6331L Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 6-TSSOP, SC-88, SOT-363.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -55°C~150°C TJ.By default, it is set to output 1.Operation is based on Not Required supply voltage.It produces a maximum output voltage of P-Channel volts at its maximum output.It comes under the family of FDG6331.The termination count is 6.In order to operate, the 6 pins are used.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 800mA.In this case, it is mounted in the way of Surface Mount.In this case, there is 310mOhm resistance in the LED driving board.When this case is used, the output current is set to 800mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.When using this LED driving board, it is recommended that the supply voltage is set to 8V.A maximum input voltage of 8V volts can be applied to it.It has a 2.5V volt minimum input voltage.
FDG6331L Features
Resistance of 310mOhm
FDG6331L Applications
There are a lot of ON Semiconductor FDG6331L Power Switches ICs applications.
- PC Card Hot Swap
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Notebook PC
- USB Power Distribution
- Storage Drives
- Set-top-box
- Hot Swap
- USB Protection
- Notebook and Tablet Computers
