FDMF3035
| Parameters | |
|---|---|
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PXSS-N33 |
| Max Output Current | 50A |
| Input Voltage-Nom | 5V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Half Bridge |
| Input Voltage (Min) | 4.5V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 5.5V |
| Output Current per Channel | 50A |
| Control Technique | PULSE WIDTH MODULATION |
| Voltage - Load | 4.5V~24V |
| Switching Frequency-Max | 1500kHz |
| Fault Protection | Shoot-Through, UVLO |
| Rds On (Typ) | 1 Ω LS, 1 Ω HS |
| Load Type | Inductive |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 31-PowerWFQFN |
| Number of Pins | 31 |
| Weight | 121.33333mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | PowerTrench®, SyncFET™ |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit, Diode Emulation |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 33 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Additional Feature | ASLO REQUIRE PFM CONTROL TECHNIQUE |
| HTS Code | 8542.39.00.01 |
| Technology | UMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
FDMF3035 Overview
Tape & Reel (TR) is used to package H bridge.For cost-saving purposes, H bridge is included in the 31-PowerWFQFN package.With the 4.5V~5.5V supply voltage, improved reliabilbridge drivery can be achieved.Surface Mount is mounted on H bridge circuit.When -40°C~150°C TJ is operating at a certain temperature, motor driver H bridge can function normally.Among H bridge motor drivers many applications are Synchronous Buck Converters.H gate is mounted on the PCB using Surface Mount.As H bridge ic of its specific characteristics, it also possesses Bootstrap Circuit, Diode Emulation.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 33 termination.A signal interface uses 31 pins as pronged contacts.As its analog IC type, H bridge circuit has been incorporated with SWITCHING REGULATOR.The H-bridge is an electronic H-bridge of the PowerTrench?, SyncFET? series.During a specified ambient temperature, the power supply can supply the maximum load current 50A.Furthermore, H-bridge is capable of providing ASLO REQUIRE PFM CONTROL TECHNIQUE.
FDMF3035 Features
Available in 31-PowerWFQFN Package / Case
Operating Temperature at the range of Surface Mount
With ASLO REQUIRE PFM CONTROL TECHNIQUE Drivers
FDMF3035 Applications
There are a lot of ON Semiconductor FDMF3035 Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Pumps
- Quad DC motor
- DVD players
- Voltage Regulators
- Voltage Regulators for DDR memory arrays
- V-Core
- DC-DC Converters
- Compact Blade Servers
- Desktop Computers
- OA equipments
