FDMF6704
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 234mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | XS™ DrMOS |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Applications | Synchronous Buck Converters |
| Technology | DrMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FDMF6704 |
| Qualification Status | Not Qualified |
| Max Output Current | 80A |
| Operating Supply Voltage | 12V |
| Interface | PWM |
| Nominal Supply Current | 2mA |
| Output Configuration | Half Bridge |
| Output Current | 35A |
| Propagation Delay | 10 ns |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 35A |
| Rise Time | 25ns |
| Fall Time (Typ) | 20 ns |
| Voltage - Load | 3V~14V |
| Fault Protection | Shoot-Through, UVLO |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 80A |
| High Side Driver | YES |
| Load Type | Inductive |
| Height | 800μm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FDMF6704 Overview
For packaging, Tape & Reel (TR) is used.In an effort to save money, H bridge is included in the 40-WFQFN Exposed Pad package.The supply voltage of 4.5V~5.5V can improve reliabilbridge drivery.In the way of Surface Mount, H bridge circuit is mounted.-55°C~150°C TJ can work normally at motor driver H bridges operating temperature.This tool is useful for a number of applications, including Synchronous Buck Converters.The PCB is mounted wH gateh Surface Mount.Among full bridges specific characteristics are Bootstrap Circuit.Transmission lines are terminated with 40 terminations with the H bridge that matches their characteristic impedance.It is used as a pronged contact as H bridge ic of a signal interface when 40 pins are used.The base H bridge ic number of FDMF6704 allows you to find more related H bridge ics by using that number.For the operation of the H bridge, a voltage supply of 12V is used.This is one of the types of electronic H-bridges in the XS? DrMOS series.When the ambient temperature reaches 80A, the maximum load current of the power supply is reached.As a result of the current flowing through the output and power supply pins, there is a current of 35A.For the highest level of efficiency, the operating supply voltage is kept at 12V.2 drivers are inegrated in the system.
FDMF6704 Features
Available in 40-WFQFN Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : FDMF6704
Number of Receivers: 12V
FDMF6704 Applications
There are a lot of ON Semiconductor FDMF6704 Full Bridge Drivers, Half-Bridge Drivers applications.
- Networking Microprocessor Voltage Regulators
- Voltage Regulators for DDR memory arrays
- Industrial Automation
- Audio-visual equipment
- Industrial Fans
- Dual DC motor
- Quad DC motor
- OA equipments
- Home Appliances
- V-Core
