FDMF6704A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 234mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | XS™ DrMOS |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Applications | Synchronous Buck Converters |
| Technology | DrMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FDMF6704 |
| Qualification Status | Not Qualified |
| Max Output Current | 80A |
| Operating Supply Voltage | 12V |
| Interface | PWM |
| Nominal Supply Current | 2mA |
| Output Configuration | Half Bridge |
| Output Current | 35A |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 35A |
| Rise Time | 25ns |
| Fall Time (Typ) | 20 ns |
| Voltage - Load | 3V~14V |
| Fault Protection | Shoot-Through, UVLO |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 80A |
| High Side Driver | YES |
| Load Type | Inductive |
| Height | 800μm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FDMF6704A Overview
For packaging, Tape & Reel (TR) is used.The 40-WFQFN Exposed Pad package includes H bridge to save money.Reliabilbridge drivery can be improved by increasing 4.5V~5.5V's supply voltage.H bridge circuit is mounted on Surface Mount.In order for -55°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.Synchronous Buck Converters is pretty useful in a variety of applications.H gate is mounted on the PCB using Surface Mount.Bootstrap Circuit is one of full bridges specific characteristics.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 40 termination.It is used as a pronged contact as H bridge ic of a signal interface when 40 pins are used.The base H bridge ic number of FDMF6704 can be used to find related H bridge ics.A voltage of 12V is used as the supply voltage.Electronic H-bridges of the XS? DrMOS series constitute this type of H-bridge.When the ambient temperature reaches 80A, the maximum load current of the power supply is reached.A current of 35A flows through the pins of the output and power supply.To ensure high efficiency, the operating supply voltage is maintained at 12V.The 2 drivers are integrated into the system.
FDMF6704A Features
Available in 40-WFQFN Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : FDMF6704
Number of Receivers: 12V
FDMF6704A Applications
There are a lot of ON Semiconductor FDMF6704A Full Bridge Drivers, Half-Bridge Drivers applications.
- Quad DC motor
- VTR
- Voltage Regulators for GPUs
- Voltage Regulators
- Desktop Computers
- Voltage Regulators for DDR memory arrays
- Non-V-Core
- High current, low profile DC-DC converters
- Networking Microprocessor Voltage Regulators
- DC-DC Converters
