FIN1022MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | FIN1022 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Throw Configuration | DPDT |
| Data Rate | 800 Mbps |
| Input Voltage (Max) | 3.6V |
| Supply Type | Single |
| Supply Current-Max (Isup) | 35mA |
| On-State Resistance (Max) | 75Ohm |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 3.5ns |
| Switch-off Time-Max | 3.5ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FIN1022MTCX Overview
For the purpose of saving board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.A digital IC Crosspoint Switch is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.This configuration includes 16 terminations as part of its basic functionality.There is a base part number of FIN1022 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 3.3V.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.Currently, it is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.Transmission is carried out over 2 channels in the turn signal switch's circuit.
FIN1022MTCX Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
FIN1022MTCX Applications
There are a lot of ON Semiconductor FIN1022MTCX Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Robotic vehicles
- Medical industry
- HDMI applications
- Communication system
- RF-based home automation system
- Electronic circuits
- High-performance memory-decoding applications
- To select different devices in microprocessor input
- Home automation system
