FL6300AMY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Tin (Sn) |
| Applications | Lighting |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 400mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 60kHz |
| Base Part Number | FL6300 |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 10V |
| Power Dissipation | 400mW |
| Output Current | 150mA |
| Max Supply Current | 5.5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | RESONANT CONTROL |
| Rise Time | 145ns |
| Fall Time (Typ) | 55 ns |
| Nominal Input Voltage | 16V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Dimming | PWM |
| Switching Frequency | 100kHz |
| Voltage - Supply (Min) | 10V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FL6300AMY Overview
Its 8-SOIC (0.154, 3.90mm Width) package is used to save board space. As part of the design of this LED driver, there are 1 outputs that have been used.Surface Mount is used to mount the led light driver.With high reliability and efficiency, this emerges as a DC DC Controller.At -40°C~125°C TA, the led driver is capable of operating.There are considerable benefits for Lighting.In this case, the frequency is 60kHz.In order for it to operate, it has 8 terminations.With 8 pins at the base, this LED driver has a base configuration.Having a voltage supply below 10V can lead to undetermined failures.As you can see, it is mounted by Surface Mount.The base part number for this LED driver is FL6300.It is acceptable to supply voltages of 25V volts.Additionally, it is categorized into Switching Regulator or Controllers according to its characteristics.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 10V.As long as the maximum supply current is less than 5.5mA, this device is capable of providing high efficiency.Loads can only be powered by 150mA current.This electronic component may perform its functions fully if the switching frequency is maintained at 100kHz.A 25V voltage is output by it.While operating the device, the circuit has 12V volts.
FL6300AMY Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 60kHz
Switching frequency of 100kHz
Output voltage of 25V
FL6300AMY Applications
There are a lot of ON Semiconductor FL6300AMY LED Driver ICs applications.
- Museum lighting
- Replacement lamps
- Linear fluorescent
- LED backlight driver for LCD displays for portable equipment
- Panel lighting
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
- LED Lightings for Inspection Devices
