FPF1003A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.5mm |
| Current Rating | 2A |
| Base Part Number | FPF1003 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 2A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 20m Ω |
| Height | 332μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF1003A Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 6-UFBGA, WLCSP package contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.The maximum output voltage is P-Channel volts.A lighting driver with Slew Rate Controlled features is available.It belongs to the family FPF1003.A total of 6 terminations have been found in it.The operation is carried out using the 6 pins.To meet the operation criteria, the maximum output current drops to 2A.Surface Mount is mounted in the way of this lighting driver.In this case, there is 95mOhm resistance in the LED driving board.Electrical components such as this are included in the IntelliMAX? series.As a result, the output current is set to 2A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 1.2V volts.
FPF1003A Features
Resistance of 95mOhm
FPF1003A Applications
There are a lot of ON Semiconductor FPF1003A Power Switches ICs applications.
- USB Power Distribution
- Notebook and Tablet Computers
- Portable Music Players
- Storage Drives
- Handheld Devices
- USB Power Distribution
- Portable GPS
- USB Protection
- Portable GPS Device
- Low Voltage I/O System Power
