banner_page

FPF1004

P-Channel 0.5mm PMIC IntelliMAX? Series FPF1004 6 Pin 3.3V 6-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1004
  • Package: 6-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 170
  • Description: P-Channel 0.5mm PMIC IntelliMAX? Series FPF1004 6 Pin 3.3V 6-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UFBGA, WLCSP
Number of Pins 6
Weight 60mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Series IntelliMAX™
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 95mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory Peripheral Drivers
Max Power Dissipation 1.2W
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Current Rating 2A
Base Part Number FPF1004
Number of Outputs 1
Output Type P-Channel
Max Output Current 2A
Voltage 5.5V
Interface On/Off
Current 2A
Output Configuration High Side
Power Dissipation 1.2W
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.2V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.2V~5.5V
Driver Number of Bits 1
Rds On (Typ) 20m Ω
Built-in Protections TRANSIENT
Height 332μm
Length 980μm
Width 1.48mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

FPF1004 Overview


It is packaged in the form of a Tape & Reel (TR).The 6-UFBGA, WLCSP package includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of P-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.As you can see, it comes from the FPF1004 family.A total of 6 terminations can be found in it.For operation, 6 pins are used.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this lighting driver.95mOhm is the resistance of the lighting driver.Electrical components such as this are included in the IntelliMAX? series.This case has the output current set to 2A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.Voltage input is limited to 5.5V volts.A minimum input voltage of 1.2V volts is required for this LED driver.

FPF1004 Features


Supplied from 3.3V
Resistance of 95mOhm

FPF1004 Applications


There are a lot of ON Semiconductor FPF1004 Power Switches ICs applications.

  • Hot Swap
  • Solid-State Drives
  • Smart Phones, Feature Phones
  • Wireless/Networking Cards
  • PC Card Hot Swap
  • Low Voltage I/O System Power
  • Handheld Devices
  • USB3.1 Power Delivery
  • USB Ports/Hubs
  • Solid State Drivers

Write a review

Note: HTML is not translated!
    Bad           Good