Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-VDFN Exposed Pad |
Number of Pins |
6 |
Weight |
60mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
50mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
1.2W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
1.5A |
Base Part Number |
FPF1005 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
P-Channel |
Max Output Current |
1.5A |
Voltage |
5.5V |
Interface |
On/Off |
Current |
1.5A |
Output Configuration |
High Side |
Power Dissipation |
1.2W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
10 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.2V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
50 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.2V~5.5V |
Driver Number of Bits |
1 |
Rds On (Typ) |
50m Ω |
Built-in Protections |
TRANSIENT |
Height |
725μm |
Length |
2mm |
Width |
2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF1005 Overview
The package is in the form of a Tape & Reel (TR).The 6-VDFN Exposed Pad package contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is P-Channel volts.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.There is a FPF1005 family of things that it belongs to.It consists of 6 terminations in total.The 6 pins are used to operate the LED driver.It contains 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.It is mounted in the way of Surface Mount.Currently, the LED driving board has 50mOhm resistance.The IntelliMAX? series includes this electrical component.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driving board can accept voltages up to 5.5V volts as an input.As a minimum input voltage, it requires 1.2V volts.
FPF1005 Features
Supplied from 3.3V
Resistance of 50mOhm
FPF1005 Applications
There are a lot of ON Semiconductor FPF1005 Power Switches ICs applications.
- Telecom and Network Systems
- HDD and SSD
- Portable Music Players
- Portable Video Game Players
- PDAs
- Smartphone and PDA
- Wireless/Networking Cards
- Solid State Drivers
- Hot Swap
- PC Card Hot Swap