FPF1006
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 1.5A |
| Base Part Number | FPF1006 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 50m Ω |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 50mOhm |
| Height | 850μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF1006 Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 6-VDFN Exposed Pad.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Load Discharge, Slew Rate Controlled features.As you can see, it comes from the FPF1006 family.A total of 6 terminations have been recorded.In order to operate, the 6 pins are used.It consists of 1 functions.The maximum output current is reduced to 1.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has a resistance of 50mOhm ohms.This electrical component can be found in the IntelliMAX? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.It is recommended to set the supply voltage to 5.5V for optimum efficiency.There is a maximum input voltage of 5.5V volts.A minimum input voltage of 1.2V volts is required for this LED driver.
FPF1006 Features
Supplied from 3.3V
Resistance of 50mOhm
FPF1006 Applications
There are a lot of ON Semiconductor FPF1006 Power Switches ICs applications.
- HDD and SSD
- USB Protection
- Portable Video Game Players
- Mobile Communication Devices
- Hot Swap
- Solid-State Drives
- HDD, SSD
- USB Power Distribution
- Set-top-box
- Wireless Modem Data Cards
