FPF1007
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1007 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 8μA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 30m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT |
| Height | 750μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 175mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 1.5A |
FPF1007 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 6-VDFN Exposed Pad package that includes it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts on this LED driver.A lighting driver with Load Discharge, Slew Rate Controlled features is available.The FPF1007 family contains this object.A total of 6 terminations can be found in it.The operation is carried out using the 6 pins.Currently, there are 1 functions associated with the lighting driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 175mOhm ohms.This electrical component is part of the IntelliMAX? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.It has a maximum input voltage of 5.5V volts.It requires 1.2V volts as the minimum input voltage.
FPF1007 Features
Supplied from 3.3V
Resistance of 175mOhm
FPF1007 Applications
There are a lot of ON Semiconductor FPF1007 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Portable Devices
- Wireless Headsets
- Hot-Swap Systems
- Hot Swap
- Storage Drives
- Hot Swaps
- Wearable Devices
- Portable/Handheld Devices
