banner_page

FPF1008

P-Channel PMIC IntelliMAX? Series FPF1008 6 Pin 3.3V 6-VDFN Exposed Pad


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1008
  • Package: 6-VDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 291
  • Description: P-Channel PMIC IntelliMAX? Series FPF1008 6 Pin 3.3V 6-VDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-VDFN Exposed Pad
Number of Pins 6
Weight 60mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2013
Series IntelliMAX™
JESD-609 Code e4
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 175mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Power Rating 1.2W
Max Power Dissipation 1.2W
Technology MOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 3.3V
Current Rating 1.5A
Base Part Number FPF1008
Number of Outputs 1
Output Type P-Channel
Voltage 5.5V
Interface On/Off
Current 1.5A
Output Configuration High Side
Power Dissipation 1.2W
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.2V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.2V~5.5V
Driver Number of Bits 1
Rds On (Typ) 30m Ω
Turn Off Time 40 µs
Built-in Protections TRANSIENT
Height 750μm
Length 2mm
Width 2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FPF1008 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).Package 6-VDFN Exposed Pad contains it.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.I believe it belongs to the FPF1008 family.There are 6 terminations in it.It is necessary to use the 6 pins in order to operate the LED driver.It has 1 functions.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.In this case, there is 175mOhm resistance in the LED driving board.It is included in the IntelliMAX? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.It has a maximum input voltage of 5.5V volts.Input voltage must be at least 1.2V volts.

FPF1008 Features


Supplied from 3.3V
Resistance of 175mOhm

FPF1008 Applications


There are a lot of ON Semiconductor FPF1008 Power Switches ICs applications.

  • USB Power Distribution
  • Telecom and Network Systems
  • Wearable Devices
  • Smart Phones, Feature Phones
  • Wireless Headsets
  • Storage (HDDs, SSDs)
  • USB Ports/Hubs
  • Mobile Communication Devices
  • USB3.1 Power Delivery
  • Wireless Modem Data Cards

Write a review

Note: HTML is not translated!
    Bad           Good