Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-VDFN Exposed Pad |
Number of Pins |
6 |
Weight |
60mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
175mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Power Rating |
1.2W |
Max Power Dissipation |
1.2W |
Technology |
MOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
1.5A |
Base Part Number |
FPF1009 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
1.5A |
Voltage |
5.5V |
Interface |
On/Off |
Nominal Supply Current |
8μA |
Current |
1.5A |
Output Configuration |
High Side |
Power Dissipation |
1.2W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
2 ms |
Switch Type |
General Purpose |
Min Input Voltage |
1.2V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
40 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.2V~5.5V |
Driver Number of Bits |
1 |
Turn On Time |
2000 µs |
Rds On (Typ) |
30m Ω |
Built-in Protections |
TRANSIENT |
Ambient Temperature Range High |
85°C |
On-State Resistance |
30mOhm |
Height |
850μm |
Length |
2mm |
Width |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF1009 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 6-VDFN Exposed Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.Load Discharge, Slew Rate Controlled features are available on the lighting driver.The FPF1009 family consists of this type.It has a total of 6 terminations.The 6 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 1.5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.It is positioned in the direction of Surface Mount.175mOhm is the resistance of the lighting driver.This electrical component can be found in the IntelliMAX? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.Input voltage is limited to 5.5V volts.It has a 1.2V volt minimum input voltage.
FPF1009 Features
Supplied from 3.3V
Resistance of 175mOhm
FPF1009 Applications
There are a lot of ON Semiconductor FPF1009 Power Switches ICs applications.
- Wireless/Networking Cards
- HDD and SSD
- Solid-State Drives
- PC Card Hot Swap
- Solid State Drivers
- Set-top-box
- Smartphone and PDA
- Wearable Devices
- PC Cards
- Portable Video Game Players