FPF1009R
| Parameters | |
|---|---|
| Base Part Number | FPF1009 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Rds On (Typ) | 30m Ω |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 40mOhm |
| Max Power Dissipation | 1.2W |
FPF1009R Overview
The package is in the form of a Tape & Reel (TR).The 6-VDFN Exposed Pad package contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.A voltage of Not Required is used to power it.Voltage output is P-Channel volts at maximum.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.It belongs to the FPF1009 family.During operation, the 6 pins are used.The maximum output current drops to 1.5A in order to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.In this LED driving board, there is 40mOhm resistance.It is part of the IntelliMAX? series.The output current is set to 1.5A in this case.In order to maximize efficiency, the supply voltage should be set at 5.5V.It has a maximum input voltage of 5.5V volts.Input voltage must be at least 1.2V volts.
FPF1009R Features
Resistance of 40mOhm
FPF1009R Applications
There are a lot of ON Semiconductor FPF1009R Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Power Distribution
- PC Card Hot Swap
- USB Ports/Hubs
- Low Voltage I/O System Power
- Hot Swap
- Gaming
- Storage Drives
- Hot Swaps
- Set-top-box
