FPF1013
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 27mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1013 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 1.8V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 43 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 800mV |
| Max Input Voltage | 1.8V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~1.8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 17m Ω |
| Built-in Protections | THERMAL |
| RoHS Status | RoHS Compliant |
FPF1013 Overview
It is packaged in the manner of a Tape & Reel (TR).The 6-UFBGA, WLCSP package contains it.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Load Discharge, Slew Rate Controlled features are available on the lighting driver.It is part of the FPF1013 family of LED drivers.As a result, there are 6 terminations.In order to operate, the 6 pins are used.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 1.5A to meet the operation criteria.High efficiency is possible at 1V supply voltage.It is positioned in the direction of Surface Mount.It has a resistance of 27mOhm.There is an electrical component included in the IntelliMAX? series.The output current is set to 1.5A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A supply voltage of 1.8V is recommended for maximum efficiency.There is a maximum input voltage of 1.8V volts.There is a minimum input voltage of 800mV volts for this LED driver.It requires 1μA current to operate.
FPF1013 Features
Supplied from 1V
Resistance of 27mOhm
FPF1013 Applications
There are a lot of ON Semiconductor FPF1013 Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- Portable/Handheld Devices
- Portable Video Game Players
- Hot-Swap Systems
- USB Protection
- Hot Swap
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- USB Ports/Hubs
