FPF1014
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 27mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.5mm |
| Current Rating | 1.5A |
| Base Part Number | FPF1014 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 1.8V |
| Voltage | 1.8V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 43 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 800mV |
| Max Input Voltage | 1.8V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~1.8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 17m Ω |
| Built-in Protections | THERMAL |
| Height | 332μm |
| Length | 950μm |
| Width | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
FPF1014 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 6-UFBGA, WLCSP package.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Load Discharge, Slew Rate Controlled features.The FPF1014 family contains this object.A total of 6 terminations can be found in it.In order to operate, the 6 pins are used.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 1V.Surface Mount is mounted in the way.Currently, the LED driving board has 27mOhm resistance.It belongs to the IntelliMAX? series.This case results in a 1.5A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It is recommended that the supply voltage be set at 1.8V in order to achieve maximum efficiency.Its maximum input voltage is 1.8V volts.As a minimum input voltage, it requires 800mV volts.It requires 1μA current to operate.
FPF1014 Features
Supplied from 1V
Resistance of 27mOhm
FPF1014 Applications
There are a lot of ON Semiconductor FPF1014 Power Switches ICs applications.
- Smartphone and PDA
- Smart Phones, Feature Phones
- Portable Music Players
- Portable GPS Device
- Wireless Headsets
- Solid State Drivers
- Telecom and Network Systems
- HDD and SSD
- Handheld Devices
- HDD, SSD
