FPF1015
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 40mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1015 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 1.8V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 43 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 800mV |
| Max Input Voltage | 1.8V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~1.8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 34m Ω |
| RoHS Status | RoHS Compliant |
FPF1015 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 6-VDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Load Discharge, Slew Rate Controlled features are available on the lighting driver.It is a member of the FPF1015 family.It contains 6 terminations.The operation is performed through the 6 pins.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.Surface Mount is mounted in the way.It has 45mOhm resistance.This electrical component is part of the IntelliMAX? series.The output current is set to 1.5A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It is recommended to set the supply voltage to 1.8V for optimum efficiency.The maximum input voltage of the LED driver is 1.8V volts.It has a 800mV volt minimum input voltage.The maximum current required for its operation is 1μA.
FPF1015 Features
Resistance of 45mOhm
FPF1015 Applications
There are a lot of ON Semiconductor FPF1015 Power Switches ICs applications.
- USB Protection
- Smart Phones, Feature Phones
- Handheld Devices
- Portable/Handheld Devices
- PC Cards
- Hard Disk Drives
- Low Voltage I/O System Power
- Notebook PC
- Wireless Modem Data Cards
- Wireless Headsets
