FPF1016
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 40mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1016 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 1.8V |
| Voltage | 1.8V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 43 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 800mV |
| Max Input Voltage | 1.8V |
| Turn-Off Delay Time | 53 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~1.8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 34m Ω |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
FPF1016 Overview
It is package in Tape & Reel (TR) case.The 6-VDFN Exposed Pad package contains it.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.Load Discharge, Slew Rate Controlled features are available on the lighting driver.I believe it belongs to the FPF1016 family.The termination count is 6.For operation, 6 pins are used.The maximum output current drops to 1.5A in order to meet the operation criteria.It is positioned in the direction of Surface Mount.It has 45mOhm resistance.Electrical components such as this are included in the IntelliMAX? series.When this case is used, the output current is set to 1.5A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A supply voltage of 1.8V is recommended for maximum efficiency.Input voltage is limited to 1.8V volts.A voltage of 800mV volts is the minimum input voltage.It requires a maximum current requirement of 1μA.
FPF1016 Features
Resistance of 45mOhm
FPF1016 Applications
There are a lot of ON Semiconductor FPF1016 Power Switches ICs applications.
- Wireless Modem Data Cards
- Hard Disk Drives
- Portable/Handheld Devices
- PDAs
- Portable Video Game Players
- HDD and SSD
- Wireless Headsets
- Solid-State Drives
- Wireless/Networking Cards
- Set-top-box
