banner_page

FPF1017

N-Channel PMIC IntelliMAX? Series FPF1017 6 Pin 6-VDFN Exposed Pad


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1017
  • Package: 6-VDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 214
  • Description: N-Channel PMIC IntelliMAX? Series FPF1017 6 Pin 6-VDFN Exposed Pad (Kg)

Details

Tags

Parameters
Lifecycle Status LAST SHIPMENTS (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-VDFN Exposed Pad
Number of Pins 6
Weight 40mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
Series IntelliMAX™
JESD-609 Code e4
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 45mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 1.2W
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FPF1017
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Max Output Current 1.5A
Operating Supply Voltage 1.8V
Voltage 1.8V
Interface On/Off
Nominal Supply Current 1μA
Current 1.5A
Output Configuration High Side
Power Dissipation 1.2W
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 1μA
Input Type Non-Inverting
Turn On Delay Time 165 μs
Switch Type General Purpose
Min Input Voltage 800mV
Max Input Voltage 1.8V
Turn-Off Delay Time 150 μs
Ratio - Input:Output 1:1
Voltage - Load 0.8V~1.8V
Driver Number of Bits 1
Rds On (Typ) 34m Ω
Height 500μm
Length 2mm
Width 2mm
RoHS Status RoHS Compliant
Lead Free Lead Free

FPF1017 Overview


It is packaged in the form of a Tape & Reel (TR).This package is included in 6-VDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.There is a FPF1017 family of things that it belongs to.It consists of 6 terminations in total.For operation, 6 pins are used.This operation requires the maximum output current to be decreased to 1.5A.The lighting driver is mounted in the direction of Surface Mount.45mOhm is the resistance of the lighting driver.The IntelliMAX? series includes this electrical component.In this case, the output current will be set to 1.5A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.For maximum efficiency, the supply voltage should be set to 1.8V.Its maximum input voltage is 1.8V volts.It has a 800mV volt minimum input voltage.It requires a maximum current requirement of 1μA.

FPF1017 Features


Resistance of 45mOhm

FPF1017 Applications


There are a lot of ON Semiconductor FPF1017 Power Switches ICs applications.

  • Telecom and Network Systems
  • HDD, SSD
  • Smart Phones, Feature Phones
  • Hot Swap
  • PDAs
  • USB Power Distribution
  • Wireless/Networking Cards
  • Wireless Modem Data Cards
  • Portable/Handheld Devices
  • PC Card Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good