FPF1018
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 40mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1018 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 1.8V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 165 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 800mV |
| Max Input Voltage | 1.8V |
| Turn-Off Delay Time | 53 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~1.8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 34m Ω |
| RoHS Status | ROHS3 Compliant |
FPF1018 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 6-VDFN Exposed Pad package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.It belongs to the family FPF1018.It has a total of 6 terminations.For operation, 6 pins are used.In order to meet the operation criteria, the maximum output current drops to 1.5A.As a result, it is mounted in the manner of Surface Mount.In this case, there is 45mOhm resistance in the LED driving board.This electrical component is included in the IntelliMAX? series.The output current is set to 1.5A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 1.8V.Its maximum input voltage is 1.8V volts.A voltage of 800mV volts is the minimum input voltage.For its operation, a current of 1μA is required.
FPF1018 Features
Resistance of 45mOhm
FPF1018 Applications
There are a lot of ON Semiconductor FPF1018 Power Switches ICs applications.
- Hot-Swap Systems
- Set-top-box
- USB Protection
- Portable GPS
- Notebook and Tablet Computers
- Mobile Communication Devices
- USB Power Distribution
- Hot Swaps
- Hot Swap
- Hard Disk Drives
