FPF1038UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 21mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FPF1038 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 1μA |
| Current | 3.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4.4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 32 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Rds On (Typ) | 20m Ω |
| Height | 332μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FPF1038UCX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 6-UFBGA, WLCSP.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is P-Channel volts at maximum.The lighting driver has Slew Rate Controlled features.As you can see, it comes from the FPF1038 family.In total, there are 6 terminations.In order to operate, the 6 pins are used.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 3.5A.The supply voltage of 4.5V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.The LED driver has 21mOhm resistance.This electrical component is part of the IntelliMAX? series.It is set to 2A in this case.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.It is recommended to set the supply voltage to 5.5V for optimum efficiency.As far as input voltage goes, its maximum is 5.5V volts.There is a minimum input voltage of 1.2V volts for this LED driver.
FPF1038UCX Features
Supplied from 4.5V
Resistance of 21mOhm
FPF1038UCX Applications
There are a lot of ON Semiconductor FPF1038UCX Power Switches ICs applications.
- USB Power Distribution
- Hot Swap
- Solid-State Drives
- Smart Phones, Feature Phones
- Wearable Devices
- Notebook and Tablet Computers
- USB Ports/Hubs
- Low Voltage I/O System Power
- Set-Top Boxes
- USB3.1 Power Delivery
