FPF1103
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.5mm |
| Base Part Number | FPF1103 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Voltage | 4V |
| Interface | On/Off |
| Current | 1.2A |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 4V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~4V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 35m Ω |
| Height | 332μm |
| Length | 960μm |
| Width | 960μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
FPF1103 Overview
It is package in Tape & Reel (TR) case.The 4-UFBGA, WLCSP package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.It has a total of Slew Rate Controlled features.There is a FPF1103 family of things that it belongs to.It contains 4 terminations.In order to operate, the 4 pins are used.Maximum output current falls to 1.2A when operation criteria are met.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has a resistance of 50mOhm ohms.A component of this type is included in the IntelliMAX? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum input voltage is 4V volts.There is a minimum input voltage of 1.2V volts for this LED driver.
FPF1103 Features
Resistance of 50mOhm
FPF1103 Applications
There are a lot of ON Semiconductor FPF1103 Power Switches ICs applications.
- Mobile Communication Devices
- Solid-State Drives
- Hot Swaps
- USB Power Distribution
- Notebook PC
- Set-top-box
- Telecom and Network Systems
- PDAs
- Storage Drives
- USB Power Distribution
