FPF1107
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1107 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Voltage | 4V |
| Interface | On/Off |
| Nominal Supply Current | 3μA |
| Current | 1.2A |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 95 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 4V |
| Turn-Off Delay Time | 2.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~4V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 35m Ω |
| Height | 332μm |
| Length | 960μm |
| Width | 960μm |
| RoHS Status | ROHS3 Compliant |
FPF1107 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 4-UFBGA, WLCSP package as well.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of P-Channel volts.A lighting driver with Slew Rate Controlled features is available.I believe it belongs to the FPF1107 family.The termination count is 4.The operation is performed through the 4 pins.Maximum output current falls to 1.2A when operation criteria are met.The LED driving board is mounted in the way of Surface Mount.Lighting drivers with 150mOhm resistance are used.It belongs to the IntelliMAX? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Input voltage is limited to 4V volts.As far as input voltage goes, it has a minimum of 1.2V volts.
FPF1107 Features
Resistance of 150mOhm
FPF1107 Applications
There are a lot of ON Semiconductor FPF1107 Power Switches ICs applications.
- Storage Drives
- Smartphone and PDA
- Portable Music Players
- Wireless Headsets
- USB3.1 Power Delivery
- Set-top-box
- HDD, SSD
- PC Cards
- PDAs
- Hot Swap
