FPF1203LUCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 67mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 185mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | FPF1203 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 200mA |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Output Current | 2.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.5μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Rds On (Typ) | 45m Ω |
| Height | 292μm |
| Length | 760μm |
| Width | 760μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF1203LUCX Overview
Cut Tape (CT) is the way it's packaged.This package is included in 4-UFBGA, WLCSP.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is P-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled features.There is a FPF1203 family of things that it belongs to.As a result, there are 4 terminations.In order to operate, the 4 pins are used.As far as functions are concerned, the lighting driver has 1.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.It has 185mOhm resistance.Electrical components such as this are included in the IntelliMAX? series.As a result, the output current is set to 2.2A.It uses an analog IC, which is SPST.The total number of channels is 1.The supply voltage should be set at 5.5V for best efficiency.It has a maximum input voltage of 5.5V volts.A voltage of 1.2V volts is the minimum input voltage.This system has a maximum current requirement of 1.5μA.
FPF1203LUCX Features
Supplied from 3.3V
Resistance of 185mOhm
1 channels
FPF1203LUCX Applications
There are a lot of ON Semiconductor FPF1203LUCX Power Switches ICs applications.
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Portable Devices
- Gaming
- Hot Swap
- Mobile Communication Devices
- Portable/Handheld Devices
- Portable GPS
- Portable Music Players
- Hot Swaps
