FPF12045UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 67mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 185mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF12045 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.2A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Rds On (Typ) | 45m Ω |
| Height | 292μm |
| Length | 760μm |
| Width | 760μm |
| RoHS Status | RoHS Compliant |
FPF12045UCX Overview
A Tape & Reel (TR) is used to package it.In the 4-UFBGA, WLCSP package, it is included.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the family FPF12045.A total of 4 terminations have been recorded.It is necessary to use the 4 pins in order to operate the LED driver.There are 1 functions of the LED driver.This results in the maximum output current dropping to 2.2A to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 185mOhm ohms.The IntelliMAX? series includes this electrical component.In total, there are 1 channels available.Optimal efficiency requires a voltage of 5.5V.Its maximum input voltage is 5.5V volts.It has a 1.2V volt minimum input voltage.This electrical component is classified as General Purpose.
FPF12045UCX Features
Supplied from 3.3V
Resistance of 185mOhm
1 channels
FPF12045UCX Applications
There are a lot of ON Semiconductor FPF12045UCX Power Switches ICs applications.
- Notebook and Tablet Computers
- Solid-State Drives
- HDD, SSD
- Hard Disk Drives
- Notebook PC
- USB Power Distribution
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Portable Video Game Players
- Hot Swap
