banner_page

FPF1204BUCX

P-Channel PMIC IntelliMAX? Series FPF1204 4 Pin 3.3V 4-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1204BUCX
  • Package: 4-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 259
  • Description: P-Channel PMIC IntelliMAX? Series FPF1204 4 Pin 3.3V 4-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Lifecycle Status LAST SHIPMENTS (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, WLCSP
Number of Pins 4
Weight 67mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
Series IntelliMAX™
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Type General Purpose
Resistance 45mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 1W
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FPF1204
Number of Outputs 1
Output Type P-Channel
Max Output Current 2.2A
Operating Supply Voltage 5.5V
Number of Channels 1
Voltage 5.5V
Interface On/Off
Current 200mA
Output Configuration High Side
Power Dissipation 1W
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 1.5μA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.2V
Max Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.2V~5.5V
Rds On (Typ) 45m Ω
Height 292μm
Length 760μm
Width 760μm
RoHS Status ROHS3 Compliant

FPF1204BUCX Overview


Tape & Reel (TR) is how it's packaged.It is included with the 4-UFBGA, WLCSP package as well.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.As a default, the output is set to 1.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.Load Discharge, Slew Rate Controlled features are available on the lighting driver.It comes under the family of FPF1204.A total of 4 terminations have been found in it.For operation, 4 pins are used.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 2.2A.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.This lighting driver is mounted in the way of Surface Mount.In this case, there is 45mOhm resistance in the LED driving board.This electrical component is part of the IntelliMAX? series.When this is the case, the output current is set to 1.5A.In total, 1 channels are available.It is recommended to set the supply voltage to 5.5V for optimum efficiency.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 1.2V volts for this LED driver.This system has a maximum current requirement of 1.5μA.The electrical component has the classification General Purpose.

FPF1204BUCX Features


Supplied from 3.3V
Resistance of 45mOhm
1 channels

FPF1204BUCX Applications


There are a lot of ON Semiconductor FPF1204BUCX Power Switches ICs applications.

  • PDAs
  • Low Voltage I/O System Power
  • USB Power Distribution
  • Portable Devices
  • PC Cards
  • USB Ports/Hubs
  • Wireless Headsets
  • Mobile Communication Devices
  • Various applications equipped with buttons
  • Notebook PC

Write a review

Note: HTML is not translated!
    Bad           Good