banner_page

FPF1204UCX

P-Channel PMIC IntelliMAX? Series FPF1204 4 Pin 3.3V 4-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1204UCX
  • Package: 4-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 880
  • Description: P-Channel PMIC IntelliMAX? Series FPF1204 4 Pin 3.3V 4-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Analog IC - Other Type SPST
Current 200mA
Output Configuration High Side
Power Dissipation 1W
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 170 μs
Switch Type General Purpose
Min Input Voltage 1.2V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 17 μs
Ratio - Input:Output 1:1
Voltage - Load 1.2V~5.5V
Rds On (Typ) 45m Ω
Height 292μm
Length 760μm
Width 760μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, WLCSP
Number of Pins 4
Weight 67mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2013
Series IntelliMAX™
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 185mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 1W
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FPF1204
Number of Outputs 1
Qualification Status Not Qualified
Output Type P-Channel
Max Output Current 2.2A
Operating Supply Voltage 5.5V
Number of Channels 1
Voltage 5.5V
Interface On/Off

FPF1204UCX Overview


It is packaged in the manner of a Tape & Reel (TR).The 4-UFBGA, WLCSP package includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.It is part of the FPF1204 family of LED drivers.A total of 4 terminations have been found in it.It is necessary to use the 4 pins in order to operate the LED driver.It consists of 1 functions.Maximum output current falls to 2.2A when operation criteria are met.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 185mOhm resistance.These electrical components are part of the IntelliMAX? series.When this case is used, the output current is set to 1.5A.This LED driving board uses an analog IC SPST.There are a total of 1 channels to choose from.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.The minimum input voltage is 1.2V volts.

FPF1204UCX Features


Supplied from 3.3V
Resistance of 185mOhm
1 channels

FPF1204UCX Applications


There are a lot of ON Semiconductor FPF1204UCX Power Switches ICs applications.

  • Handheld Devices
  • Hot Swaps
  • Wireless Modem Data Cards
  • PC Card Hot Swap
  • Notebook PC
  • Hot Swap
  • Wearable Devices
  • Portable Video Game Players
  • USB Power Distribution
  • Gaming

Write a review

Note: HTML is not translated!
    Bad           Good