FPF1207UCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 67mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 66mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1207 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 220 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 4V |
| Turn-Off Delay Time | 9 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~4V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 50m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 0.539mm |
| Length | 0.76mm |
| Width | 0.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF1207UCX Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 4-UFBGA, WLCSP.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.The maximum output voltage is P-Channel volts.The lighting driver has Slew Rate Controlled features.The FPF1207 family consists of this type.It contains 4 terminations.The 4 pins are used for the operation of the system.It consists of 1 functions.The maximum output current is reduced to 1.2A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this lighting driver.There is 66mOhm resistance on the LED driver.The IntelliMAX? series includes this electrical component.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The Vsup value (maximum supply voltage) is set to 4V.A supply voltage of 4V is recommended for maximum efficiency.There is a maximum input voltage of 4V volts.It has a 1.2V volt minimum input voltage.
FPF1207UCX Features
Supplied from 3.3V
Resistance of 66mOhm
FPF1207UCX Applications
There are a lot of ON Semiconductor FPF1207UCX Power Switches ICs applications.
- Smartphone and PDA
- USB Power Distribution
- Hard Disk Drives
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Portable Video Game Players
- USB3.1 Power Delivery
- Storage Drives
- PC Cards
- Portable GPS Device
