banner_page

FPF1320UCX

P-Channel 0.5mm PMIC IntelliMAX? Series FPF1320 6 Pin 3.3V 6-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1320UCX
  • Package: 6-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 190
  • Description: P-Channel 0.5mm PMIC IntelliMAX? Series FPF1320 6 Pin 3.3V 6-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 170mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory Peripheral Drivers
Power Rating 1.2W
Max Power Dissipation 1.2W
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number FPF1320
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.5A
Operating Supply Voltage 5.5V
Voltage 5.5V
Interface On/Off
Nominal Supply Current 1.5A
Current 1.5A
Output Configuration High Side
Power Dissipation 1.2W
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 250 μs
Switch Type General Purpose
Min Input Voltage 1.5V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 335 μs
Ratio - Input:Output 2:1
Voltage - Load 1.5V~5.5V
Driver Number of Bits 2
Fault Protection Reverse Current
Rds On (Typ) 42m Ω
Ambient Temperature Range High 85°C
On-State Resistance 50mOhm
Height 625μm
Length 1mm
Width 1.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UFBGA, WLCSP
Number of Pins 6
Weight 60mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
Series IntelliMAX™
JESD-609 Code e1
Feature Slew Rate Controlled

FPF1320UCX Overview


As a result, it is packaged in the form of a Tape & Reel (TR).There is a 6-UFBGA, WLCSP package that includes it.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Slew Rate Controlled features.The FPF1320 family contains this object.As a result, there are 6 terminations.In order to operate, 6 pins are used.It has 1 functions.This results in the maximum output current dropping to 1.5A to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.As a result, it is mounted in the manner of Surface Mount.In this case, there is 170mOhm resistance in the LED driving board.It is included in the IntelliMAX? series.In this case, the output current will be set to 1.5A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage should be set at 5.5V for best efficiency.It has a maximum input voltage of 5.5V volts.There is a minimum input voltage of 1.5V volts for this LED driver.

FPF1320UCX Features


Supplied from 3.3V
Resistance of 170mOhm

FPF1320UCX Applications


There are a lot of ON Semiconductor FPF1320UCX Power Switches ICs applications.

  • Portable/Handheld Devices
  • Various applications equipped with buttons
  • Handheld Devices
  • Wireless/Networking Cards
  • Hot Swap
  • Hot Swap
  • Telecom and Network Systems
  • Set-top-box
  • Portable GPS Device
  • Portable GPS

Write a review

Note: HTML is not translated!
    Bad           Good