FPF1321BUCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1321 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Current | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 1.5V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 42m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 50mOhm |
| Height | 625μm |
| Length | 960μm |
| Width | 1.46mm |
| RoHS Status | ROHS3 Compliant |
FPF1321BUCX Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 6-UFBGA, WLCSP package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of P-Channel volts is available from the output of this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.This object belongs to the FPF1321 family.As a result, there are 6 terminations.The operation is carried out using the 6 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 1.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 170mOhm ohms.These electrical components are part of the IntelliMAX? series.This results in a 1.5A output current.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.Input voltage must be at least 1.5V volts.
FPF1321BUCX Features
Supplied from 3.3V
Resistance of 170mOhm
FPF1321BUCX Applications
There are a lot of ON Semiconductor FPF1321BUCX Power Switches ICs applications.
- Set-Top Boxes
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable GPS Device
- Portable Devices
- Low Voltage I/O System Power
- USB Power Distribution
- PC Card Hot Swap
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
