FPF1321UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1321 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 335 μs |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 42m Ω |
| Height | 332μm |
| Length | 1mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF1321UCX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 6-UFBGA, WLCSP.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.It belongs to the FPF1321 family.A total of 6 terminations have been recorded.The 6 pins are used for the operation of the system.The LED driving board has a total of 1 functions.The maximum output current must drop to 1.5A to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.Surface Mount is mounted in the way.170mOhm resistance is present in the lighting driver.This electrical component can be found in the IntelliMAX? series.The output current is set to 1.5A in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.It has a maximum input voltage of 5.5V volts.A voltage of 1.5V volts is the minimum input voltage.
FPF1321UCX Features
Supplied from 3.3V
Resistance of 170mOhm
FPF1321UCX Applications
There are a lot of ON Semiconductor FPF1321UCX Power Switches ICs applications.
- HDD, SSD
- Storage (HDDs, SSDs)
- Notebook PC
- Hard Disk Drives
- Hot Swap
- Portable GPS
- Wearable Devices
- Handheld Devices
- Portable/Handheld Devices
- Hot-Swap Systems
