FPF1504BUCX
| Parameters | |
|---|---|
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1V |
| Max Input Voltage | 3.6V |
| Turn-Off Delay Time | 37 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Rds On (Typ) | 15m Ω |
| Height | 332μm |
| Length | 960μm |
| Width | 960μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FPF1504 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Voltage | 3.6V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 750nA |
FPF1504BUCX Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 4-UFBGA, WLCSP package that includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts has been specified.Features of the lighting driver are Load Discharge, Slew Rate Controlled.It is part of the FPF1504 family of LED drivers.A total of 4 terminations have been recorded.The operation is carried out using the 4 pins.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this lighting driver.Lighting drivers with 80mOhm resistance are used.This electrical component is included in the IntelliMAX? series.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels to choose from.In order to achieve the best efficiency, the supply voltage should be set to 3.6V.Voltage input is limited to 3.6V volts.It requires 1V volts as the minimum input voltage.It has a maximum current requirement of 750nA.
FPF1504BUCX Features
Supplied from 3.3V
Resistance of 80mOhm
1 channels
FPF1504BUCX Applications
There are a lot of ON Semiconductor FPF1504BUCX Power Switches ICs applications.
- Solid State Drivers
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Wireless Headsets
- Hot Swap
- HDD, SSD
- Hard Disk Drives
- Portable Devices
- Wireless/Networking Cards
- Handheld Devices
