banner_page

FPF1504LUCX

P-Channel 0.5mm PMIC IntelliMAX? Series FPF1504 4 Pin 3.3V 4-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF1504LUCX
  • Package: 4-UFBGA, WLCSP
  • Datasheet: -
  • Stock: 239
  • Description: P-Channel 0.5mm PMIC IntelliMAX? Series FPF1504 4 Pin 3.3V 4-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.5A
Operating Supply Voltage 3.6V
Number of Channels 1
Voltage 3.6V
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 300nA
Current 1.5A
Output Configuration High Side
Power Dissipation 1W
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Turn On Delay Time 210 μs
Switch Type General Purpose
Min Input Voltage 1V
Max Input Voltage 3.6V
Turn-Off Delay Time 16 μs
Ratio - Input:Output 1:1
Voltage - Load 1V~3.6V
Rds On (Typ) 15m Ω
Height 332μm
Length 960μm
Width 960μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, WLCSP
Number of Pins 4
Weight 42mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
Series IntelliMAX™
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 30mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 1W
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number FPF1504

FPF1504LUCX Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 4-UFBGA, WLCSP.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Load Discharge, Slew Rate Controlled features.I believe it belongs to the FPF1504 family.It contains 4 terminations.During operation, the 4 pins are used.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way.It has 30mOhm resistance.This electrical component can be found in the IntelliMAX? series.In this case, the output current is set to 1.5A.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels to choose from.For maximum efficiency, the supply voltage should be set to 3.6V.This LED driving board can accept voltages up to 3.6V volts as an input.As a minimum input voltage, it requires 1V volts.

FPF1504LUCX Features


Supplied from 3.3V
Resistance of 30mOhm
1 channels

FPF1504LUCX Applications


There are a lot of ON Semiconductor FPF1504LUCX Power Switches ICs applications.

  • USB Protection
  • Smartphone and PDA
  • PDAs
  • Mobile Communication Devices
  • Wearable Devices
  • Storage Drives
  • USB Ports/Hubs
  • Hot Swaps
  • Notebook and Tablet Computers
  • Telecom and Network Systems

Write a review

Note: HTML is not translated!
    Bad           Good