FPF1504UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1504 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Voltage | 3.6V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1V |
| Max Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Rds On (Typ) | 15m Ω |
| Height | 332μm |
| Length | 1mm |
| Width | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF1504UCX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 4-UFBGA, WLCSP package.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts has been specified.Load Discharge, Slew Rate Controlled features are available on the lighting driver.The FPF1504 family consists of this type.It consists of 4 terminations in total.The 4 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.Surface Mount is mounted in the way.The LED driver has 15mOhm resistance.There is an electrical component included in the IntelliMAX? series.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.In order to maximize efficiency, the supply voltage should be set to 3.6V.This LED driver can handle voltages up to 3.6V volts.The input voltage minimum is 1V volts.A maximum current requirement of 1μA is required for its operation.
FPF1504UCX Features
Supplied from 3.3V
Resistance of 15mOhm
1 channels
FPF1504UCX Applications
There are a lot of ON Semiconductor FPF1504UCX Power Switches ICs applications.
- USB3.1 Power Delivery
- Wireless Headsets
- PDAs
- USB Power Distribution
- Smartphone and PDA
- Hard Disk Drives
- Portable GPS Device
- Hot-Swap Systems
- Mobile Communication Devices
- Wireless Modem Data Cards
