Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Weight |
23g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
700mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Power Rating |
250mW |
Max Power Dissipation |
250mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Current Rating |
50mA |
Base Part Number |
FPF2002 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
P-Channel |
Max Output Current |
50mA |
Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current |
100mA |
Output Configuration |
High Side |
Power Dissipation |
250mW |
Output Current |
50mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
50 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
500 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Min Current Limit |
50mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
700m Ω |
Drain to Source Resistance |
700mOhm |
Height |
1mm |
Length |
2mm |
Width |
1.25mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2002 Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the 5-TSSOP, SC-70-5, SOT-353 package.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It comes under the family of FPF2002.The termination count is 5.5 pins are used for operation.As far as functions are concerned, the lighting driver has 1.To meet the operation criteria, the maximum output current drops to 50mA.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 700mOhm ohms.The IntelliMAX? series includes this electrical component.In this case, the output current is set to 50mA.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.Input voltage is limited to 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2002 Features
Resistance of 700mOhm
FPF2002 Applications
There are a lot of ON Semiconductor FPF2002 Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- HDD and SSD
- Storage (HDDs, SSDs)
- Smartphone and PDA
- PC Card Hot Swap
- Portable Video Game Players
- USB Power Distribution
- USB Power Distribution