FPF2003
| Parameters | |
|---|---|
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 700m Ω |
| Drain to Source Resistance | 700mOhm |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | FPF2003 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 50mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 50mA |
| Output Configuration | High Side |
| Power Dissipation | 250mW |
| Output Current | 75mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 10μs |
| Fall Time (Typ) | 100 ns |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 50mA |
FPF2003 Overview
A Tape & Reel (TR) is used to package it.It is included in the package 5-TSSOP, SC-70-5, SOT-353.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of P-Channel volts.It has a total of Status Flag features.This object belongs to the FPF2003 family.It contains 5 terminations.5 pins are used for operation.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 50mA.The lighting driver is mounted in the way of Surface Mount.700mOhm resistance is present in the lighting driver.A component of this type is included in the IntelliMAX? series.It is set to 75mA in this case.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A maximum input voltage of 5.5V volts can be applied to it.It requires 1.8V volts as the minimum input voltage.
FPF2003 Features
Resistance of 700mOhm
FPF2003 Applications
There are a lot of ON Semiconductor FPF2003 Power Switches ICs applications.
- Solid-State Drives
- Notebook PC
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Portable Music Players
- Portable Video Game Players
- Portable Devices
- Wireless/Networking Cards
- PC Cards
- Portable GPS
