Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Weight |
23g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Auto Restart, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
700mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Power Rating |
250mW |
Max Power Dissipation |
250mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Base Part Number |
FPF2004 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
P-Channel |
Max Output Current |
100mA |
Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current |
200mA |
Output Configuration |
High Side |
Power Dissipation |
250mW |
Output Current |
100mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
50 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Rise Time |
10μs |
Fall Time (Typ) |
100 ns |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
500 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Min Current Limit |
100mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
700m Ω |
Drain to Source Resistance |
700mOhm |
Height |
1mm |
Length |
2mm |
Width |
1.25mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2004 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 5-TSSOP, SC-70-5, SOT-353 package as well.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.There is a FPF2004 family of things that it belongs to.The termination count is 5.5 pins are used for operation.It contains 1 functions.It is necessary to reduce the maximum output current to 100mA to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.In this LED driving board, there is 700mOhm resistance.The IntelliMAX? series includes this electrical component.In this case, the output current is set to 100mA.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.It has a maximum input voltage of 5.5V volts.The input voltage minimum is 1.8V volts.
FPF2004 Features
Resistance of 700mOhm
FPF2004 Applications
There are a lot of ON Semiconductor FPF2004 Power Switches ICs applications.
- PDAs
- Solid State Drivers
- Hard Disk Drives
- Telecom and Network Systems
- Smartphone and PDA
- Portable Music Players
- USB Power Distribution
- PC Cards
- Solid-State Drives
- Wearable Devices