FPF2005
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Current Rating | 100mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2005 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 250mW |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 10μs |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 700m Ω |
| Drain to Source Resistance | 700mOhm |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF2005 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 5-TSSOP, SC-70-5, SOT-353.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.The maximum output voltage is P-Channel volts.It has a total of Auto Restart, Status Flag features.It is a member of the FPF2005 family.It contains 5 terminations.5 pins are used for operation.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 100mA.The lighting driver is mounted in the way of Surface Mount.It has 700mOhm resistance.It is included in the IntelliMAX? series.This case results in a 150mA output current.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In order to maximize efficiency, the supply voltage should be set to 5.5V.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2005 Features
Resistance of 700mOhm
FPF2005 Applications
There are a lot of ON Semiconductor FPF2005 Power Switches ICs applications.
- USB Ports/Hubs
- PC Card Hot Swap
- Solid State Drivers
- Storage Drives
- Set-Top Boxes
- Hot Swap
- USB Power Distribution
- Handheld Devices
- Portable Music Players
- PDAs
