FPF2006
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 250mW |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 100mA |
| Base Part Number | FPF2006 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 200mA |
| Output Configuration | High Side |
| Power Dissipation | 250mW |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 10μs |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 700m Ω |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2006 Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 5-TSSOP, SC-70-5, SOT-353.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.The lighting driver has Status Flag features.The FPF2006 family consists of this type.As a result, there are 5 terminations.It is necessary to use the 5 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.As a result, the maximum output current is reduced to 100mA in order to meet the operation requirements.The LED driving board is mounted in the way of Surface Mount.Currently, the LED driving board has 700mOhm resistance.It belongs to the IntelliMAX? series.As a result, the output current is set to 100mA.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There is a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.
FPF2006 Features
Resistance of 700mOhm
FPF2006 Applications
There are a lot of ON Semiconductor FPF2006 Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swap
- Hot-Swap Systems
- Wireless Headsets
- Storage Drives
- Portable GPS Device
- Set-Top Boxes
- Wireless/Networking Cards
- Smartphone and PDA
- Hard Disk Drives
