FPF2007
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 700mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | FPF2007 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 100mA |
| Output Configuration | High Side |
| Power Dissipation | 250mW |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 10μs |
| Fall Time (Typ) | 100 ns |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 700m Ω |
| Drain to Source Resistance | 700mOhm |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF2007 Overview
It is packaged in the manner of a Tape & Reel (TR).Package 5-TSSOP, SC-70-5, SOT-353 contains it.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.Features of the lighting driver are Status Flag.The FPF2007 family consists of this type.As a result, there are 5 terminations.For operation, we use the 5 pins.Currently, the lighting driver has a total of 1 functions.Surface Mount is mounted in the way of this LED driving board.In this case, there is 700mOhm resistance in the LED driving board.This electrical component is part of the IntelliMAX? series.When this is the case, the output current is set to 150mA.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The maximum input voltage is 5.5V volts.It has a 1.8V volt minimum input voltage.
FPF2007 Features
Resistance of 700mOhm
FPF2007 Applications
There are a lot of ON Semiconductor FPF2007 Power Switches ICs applications.
- Solid-State Drives
- Smart Phones, Feature Phones
- Portable Devices
- USB Ports/Hubs
- Hard Disk Drives
- USB3.1 Power Delivery
- Mobile Communication Devices
- PC Cards
- Wearable Devices
- USB Power Distribution
