FPF2025
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.6V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.6V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.15A |
| Rds On (Typ) | 215m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 332μm |
| Length | 1mm |
| Width | 1.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 305mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 150mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2025 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 200mA |
| Output Configuration | High Side |
| Output Current | 100mA |
FPF2025 Overview
The package is in the form of a Tape & Reel (TR).The 6-UFBGA, WLCSP package includes it.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.It has a total of Auto Restart, Status Flag features.As you can see, it comes from the FPF2025 family.It has a total of 6 terminations.In order to operate, the 6 pins are used.As far as the lighting driver is concerned, there are 1 functions.The maximum output current drops to 100mA in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this lighting driver.The LED driver has 305mOhm resistance.It is set to 100mA in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.Its maximum input voltage is 5.5V volts.As a minimum input voltage, it requires 1.6V volts.
FPF2025 Features
Supplied from 3.3V
Resistance of 305mOhm
FPF2025 Applications
There are a lot of ON Semiconductor FPF2025 Power Switches ICs applications.
- Various applications equipped with buttons
- Hot Swap
- Hard Disk Drives
- HDD, SSD
- Set-Top Boxes
- USB Power Distribution
- Gaming
- Set-top-box
- Notebook and Tablet Computers
- Hot Swap
