FPF2026
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 305mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 150mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2026 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 200mA |
| Output Configuration | High Side |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.6V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.6V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.15A |
| Rds On (Typ) | 215m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 332μm |
| Length | 1mm |
| Width | 1.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
FPF2026 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 6-UFBGA, WLCSP.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts has been specified.In terms of features, the LED driving board has Status Flag.It belongs to the FPF2026 family.The termination count is 6.During operation, the 6 pins are used.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 100mA.The supply voltage of 3.3V is conducive to high efficiency.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 305mOhm resistance.This results in a 100mA output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A maximum input voltage of 5.5V volts can be applied to it.As far as input voltage goes, it has a minimum of 1.6V volts.
FPF2026 Features
Supplied from 3.3V
Resistance of 305mOhm
FPF2026 Applications
There are a lot of ON Semiconductor FPF2026 Power Switches ICs applications.
- Portable Music Players
- Hard Disk Drives
- Hot-Swap Systems
- Low Voltage I/O System Power
- Telecom and Network Systems
- Mobile Communication Devices
- Set-Top Boxes
- Wireless/Networking Cards
- Set-top-box
- USB Ports/Hubs
