FPF2027
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 305mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 150mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2027 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.6V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.6V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.15A |
| Rds On (Typ) | 215m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF2027 Overview
Tape & Reel (TR) is how it's packaged.This package is included in 6-UFBGA, WLCSP.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts on this LED driver.It is equipped with Status Flag features.It is a member of the FPF2027 family.A total of 6 terminations can be found in it.For operation, we use the 6 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 100mA to meet the operation criteria.Supply voltages of 3.3V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has a resistance of 305mOhm ohms.This results in a 100mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.There is a maximum input voltage of 5.5V volts.A minimum input voltage of 1.6V volts is required for this LED driver.
FPF2027 Features
Supplied from 3.3V
Resistance of 305mOhm
FPF2027 Applications
There are a lot of ON Semiconductor FPF2027 Power Switches ICs applications.
- Low Voltage I/O System Power
- Portable Music Players
- Hot Swaps
- Notebook and Tablet Computers
- Solid State Drivers
- HDD, SSD
- USB Ports/Hubs
- HDD and SSD
- USB Protection
- Hot-Swap Systems
