FPF2102
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Power Rating | 667mW |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 400mA |
| Base Part Number | FPF2102 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 400mA |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 125mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.25mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2102 Overview
It is package in Tape & Reel (TR) case.It's included in the SC-74A, SOT-753 package.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.The FPF2102 family contains this object.There are 5 terminations in it.The operation is performed through the 5 pins.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 200mA.High efficiency is possible when the supply voltage is set to 3.3V.It is mounted in the way of Surface Mount.Currently, the LED driving board has 160mOhm resistance.It belongs to the IntelliMAX? series.It is set to 200mA in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.For maximum efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2102 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2102 Applications
There are a lot of ON Semiconductor FPF2102 Power Switches ICs applications.
- Portable Video Game Players
- Set-Top Boxes
- USB Ports/Hubs
- Hot Swaps
- Hot Swap
- Portable Music Players
- Notebook PC
- PDAs
- Hot-Swap Systems
- Telecom and Network Systems
