FPF2103
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 400mA |
| Base Part Number | FPF2103 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 200mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 200mA |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 12μs |
| Fall Time (Typ) | 136 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 125mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.25mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2103 Overview
Tape & Reel (TR) is how it's packaged.It is included in the package SC-74A, SOT-753.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.There is a maximum output voltage of P-Channel volts.Status Flag features are available on the lighting driver.It comes under the family of FPF2103.A total of 5 terminations have been found in it.For operation, 5 pins are used.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 200mA.The supply voltage of 3.3V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.It has 160mOhm resistance.A component of this type is included in the IntelliMAX? series.This case has the output current set to 200mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.A minimum input voltage of 1.8V volts is required for this LED driver.
FPF2103 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2103 Applications
There are a lot of ON Semiconductor FPF2103 Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS
- Hot Swaps
- PC Card Hot Swap
- USB3.1 Power Delivery
- Mobile Communication Devices
- Low Voltage I/O System Power
- Notebook PC
- Storage (HDDs, SSDs)
- USB Power Distribution
